VDO M5 - Setting the Total Distance

47
BIKETPC
SET
Setting the total distance
– Open the menu:
Press and hold the SET button
– Scroll from Total values to Settings:
Press the BIKE or TPC button
– Open the settings menu:
Press the SET button
– Scroll to Total distance in the menu:
Press the BIKE or TPC button
– Start the setting: Press the SET button
– Change the setting:
Press the BIKE or TPC button
– Confirm the selection:
Press the SET button
– Exit the settings menu:
Press and hold the SET button
ATTENTION: All data remains stored when
you replace the battery.