Scan Time
Setting for the scan time for frequency, storage or track scanning.
☞
Choose 5, 10 or 15 seconds.
On / Off Logic
☞
Activate this function to limit the operation of the device to one hour after the
ignition key is removed.
Warning light
If this function is activated, the red warning light will blink when the operating panel
and the ignition key are removed.
Contrast
Setting the display contrast.
☞
Set the optimal contrast for your angle of view between 0 and 31.
User
Setting the user mode for radio, CD and CD changer.
☞
Select either “COMMON” or “EXPERT”.
Icons
☞
Choose either “STATIC” (immovable) or “ANIMATED” (moving) symbols for operation
of the radio or another sound source.
Loudspeaker Test
☞
Activate this function to control the loudspeaker connections and positions.
You will hear several consecutive confirmation tones in turn from one of the four
loudspeakers.
☞
Switch the unit off to terminate the loudspeaker test.
40
INITIALISATION
To Next Page
Loading...
