EasyManua.ls Logo

Vectrix VX-1 - Page 50

Vectrix VX-1
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-8
The battery charger is integrated into the scooter and
monitors the status/condition of the battery pack during
normal operation as well as charging. The battery pack
is an integrated system of battery management as
well as cooling air ow control. The charger will detect
cell differences in the battery pack and automatically
perform an Equalization Charge of the battery. You will
be unaware of the action, except that charging time will
be extended beyond the typical 3 to 5 hour charging
time. The AC charging cord is located in the trunk
storage area under the seat. The male connector on
the charging cord is specic to the country.
It is recommended that you charge in a location that
is away from combustible materials and in a well-
ventilated area. If you are charging your scooter
outdoors, avoid charging in the rain.
Frequent charging of the battery will signicantly
increase its life span, so do not hesitate to charge
frequently. The charger’s sensing electronics will stop/
pause the charging process automatically. The charging
process can be stopped at any time without damage.
During the charging process the instrument clusters will
display several charge status items.
A
B
C
The left instrument cluster monitors the following:
A. “Total Charge Time” displays the total charge time or
time remaining during delay mode.
B. “Highest Battery Temperature” displays, in sequence,
the highest battery cell temperature in each of the four
(4) modules, and the ambient temperature.
C. “Battery Voltage” displays the system voltage while
charging.
Display During Charging:

Table of Contents

Related product manuals