Vega VEGAFLEX 86 - Mounting; General instructions

14
6Setupwithsmartphone/tablet(Bluetooth)
VEGAFLEX 86 • Modbus and Levelmaster protocol
47614-EN-230605
6 Setup with smartphone/tablet (Bluetooth)
6.1 Preparations
Make sure that the Bluetooth function of the display and adjustment
moduleisactivated.Forthis,theswitchonthebottomsidemustbe
set to " On".
1
On
O
Fig. 7: Activate Bluetooth
1 Switch
On = Bluetooth active
O= Bluetoothnotactive
The security concept of Bluetooth operation absolutely requires that
the default setting of the sensor PIN be changed. This prevents unau-
thorizedaccesstothesensor.
The default setting of the sensor PIN is " 0000". First of all you have
tochangethesensorPINintheadjustmentmenuofthesensor,e.g.
to " 1111":
1. Intheadjustmentmenu,goto"Additional adjustments","PIN"
Note:
The menu item " PIN" is only displayed if in the menu " Setup","Lock/
Unlock adjustment" the adjustment is released.
2. Change sensor PIN
Note:
Bluetooth access can only be established if the current sensor PIN
diersfromthedefaultsetting"0000". It is possible both when the
Activate Bluetooth
Change sensor PIN