Fig. 10: Front flush installation
1 Plastic or ceramic material
2 Fixing screw (if technically possible)
In very abrasive products, VEGAMIP 61 should be installed with a
mounting adapter or in front of a suitable window. In this case, you
have to use a window material which is appropriately resistant.
In case of strong vessel vibrations, the VEGAMIP 61 should be
mounted with anti vibration blocks or rubber buffers.
Abrasive medium
Vibrations
VEGAMIP R61 • - Transistor 19
4 Mounting
40694-EN-120228
To Next Page
Loading...
