Vega VEGAPULS 61 - Parameter Adjustment

To Next Page

To Previous Page

5 Set up with the display and adjustment module

VEGAPULS 61 • Probus PA

47106-EN-210621

1 2

Fig. 10: Installing the display and adjustment module in the double chamber

housing

1 In the electronics compartment

2 In the connection compartment

Note:

If you intend to retrot the instrument with a display and adjustment

module for continuous measured value indication, a higher lid with an

inspection glass is required.

5.2 Parameter adjustment

1. Go to the menu " Setup" via the display and adjustment module.

2. In the menu item " Medium"you select the medium of your ap-

plication, for example " Aqueous solution".

3. Select in the menu item " Application" the vessel, the application

and the vessel form, for example, storage tank.

4. Carry out the adjustment in the menu items " Min. adjustment"

and " Max. adjustment".

Set parameters

Other manuals for Vega VEGAPULS 61