Vega VEGAPULS 67 - Set up with Smartphone;Tablet, Pc;Notebook Via Bluetooth; Preparations

18
6Setupwithsmartphone/tablet,PC/notebookviaBluetooth
VEGAPULS 67 • HART and accumulator pack
47154-EN-210621
6 Set up with smartphone/tablet, PC/
notebook via Bluetooth
6.1 Preparations
Make sure that the Bluetooth function of the display and adjustment
moduleisactivated.Forthis,theswitchonthebottomsidemustbe
set to " On".
1
On
O
Fig. 11: Activate Bluetooth
1 Switch
On = Bluetooth active
O = Bluetooth not active
The security concept of Bluetooth operation absolutely requires that
the default setting of the sensor PIN be changed. This prevents unau-
thorizedaccesstothesensor.
The default setting of the sensor PIN is " 0000". First of all you have
tochangethesensorPINintheadjustmentmenuofthesensor,e.g.
to " 1111":
1. Intheadjustmentmenu,goto"Additional adjustments","PIN"
Note:
The menu item " PIN" is only displayed if in the menu " Setup","Lock/
Unlock adjustment" the adjustment is released.
2. Change sensor PIN
Activate Bluetooth
Change sensor PIN