Vega VEGAPULS 6X - Mounting preparations, mounting strap

18
6 Set up with the display and adjustment module
VEGAPULS 6X • Modbus and Levelmaster protocol
1015562-EN-240311
Note:
For the duration of the reset, the device changes its behaviour from
the normal measuring operation. Therefore, observe the following for
downstream systems:
•
The current output outputs the set false signal
•
The Asset-Management function outputs the message "Mainte-
nance" aus
6.2.4 Extended settings
This menu item contains operational settings of the sensor.
Mode:
Countryorregion-specicsettingsfortheradarsignalsaredeter-
mined via the operating mode.
•
Mode 1: EU, Albania, Andorra, Azerbaijan, Australia, Belarus, Bos-
nia and Herzegovina, Canada, Liechtenstein, Moldavia, Monaco,
Montenegro, New Zealand, Northern Macedonia, Norway, San
Marino, Saudi Arabia, Serbia, South-Africa, Switzerland, Turkey,
Ukraine, United Kingdom, USA
•
Mode of operation 2: Brazil, Japan, South Korea, Taiwan, Thailand
•
Mode of operation 3: India, Malaysia
•
Mode of operation 4: Russia, Kazakhstan
Note:
Depending on the operating mode, metrological properties of the
device can change (see chapter "Technical data, input variable").
Voltage supply:
The power supply determines whether the sensor is in operation
permanently or only in accordance with certain requirements.
Mode