Vega VEGAPULS 6X - 1.5 Mode of operation - Radar signal; 1.6 Installation and operation in the USA and Canada

4
1 For your safety
VEGAPULS 6X • Modbus and Levelmaster protocol
1015562-EN-240311
1.5 Mode of operation - Radar signal
Countryorregionspecicsettingsfortheradarsignalsaredeter-
mined via the mode. The operating mode must be set in the operating
menu via the respective operating tool at the beginning of the setup.
Caution:
Operating the device without selecting the relevant mode constitutes
a violation of the regulations of the radio approvals of the respective
country or region.
1.6 Installation and operation in the USA and
Canada
This information is only valid for USA and Canada. Hence the follow-
ing text is only available in the English language.
Installations in the US shall comply with the relevant requirements of
the National Electrical Code (NEC - NFPA 70) (USA).
Installations in Canada shall comply with the relevant requirements of
the Canadian Electrical Code (CEC Part I) (Canada).
A Class 2 power supply unit has to be used for the installation in the
USA and Canada.