Vega VEGAPULS 6X - Page 9

9
VEGAPULS 6X
66216-EN-220518
•
If grounding of the cable screening is necessary, this must be carried out acc. to the valid stand-
ards and regulations, e.g. acc. to IEC/EN 60079-14.
•
Close the housing lid (s) up to the stop before starting operating, to ensure the IP protection rat-
ing specied on the type label.
Cableglands,threadedopenings
Type Thread Cablediameter[mm] Torques[Nm]
Hummel EXIOS A2F 1.608.2003.50 M20 x 1.5 6 … 12 mm 8
Hummel EXIOS A2F 1.608.1203.70 ½ NPT 6 … 12 mm 8
Hummel EXIOS MZ 1.6Z5.2000.51 M20 x 1.5 9 … 13 mm 8
Hummel EXIOS MZ 1.6Z5.1200.70 ½ NPT 9 … 13 mm 8
The specied torques are test torques and can only be regarded as reference values. The manufac-
turer's mounting instructions provided must be observed.
If suitable cable glands or cable insertion possibilities not included in the scope of supply are used,
these must be compatible with the threaded openings.
AluminiumhousingwithM20x1.5thread,½NPTthread
Stainless-steelhousing(necast)withM20x1.5thread,½NPTthread
Maintenance
To ensure the functionality of the device, periodic visual inspection is recommended for:
•
Secure mounting
•
No mechanical damages or corrosion
•
Worn or otherwise damaged cables