Short press 、 button to switch assist level. Switching level is not cycled, that is, after reaching 5
th
level, short press button to return to off level. It’s the same when adjusting up.
6.3 Information switch
In a power-on state, short press M button to switch alternately from basic interface, function
interface I, and function interface II. In normal riding state, if the bike speed is greater than 0, and
display is not in the basic interface, then basic interface will be automatically returned to after 5 s no
operation on M button.
Function interface I displays the average speed, maximum speed and subtotal TRIP mileage；
Function interface II displays the endurance mileage and total mileage.
The switching process of each interface, as shown below:
*If BMS communication is not supported, display cannot obtain accurate RANGE information, and
the value of RANGE is displayed as 000.0KM
6.4 Light control function
In a power-on state, long press button to turn on the front light, at the meantime, a light icon
on top left corner of screen will appear indicating light-on status. Long press button to turn the
lights off.
To Next Page
Loading...
Need help?
General
