Need help?Do you have a question about the VeloFox DM05 and is the answer not in the manual?
Identifies the product as FSTN Screen LCD Display, model DM05.
Records the version history and revisions made to the document.
States the document's purpose and rights reserved by the company.
Details the product name, model DM05, and communication versions (UART/CAN BUS).
Highlights features like tempered glass, 3.5-inch display, adjustable mounting, and IP65 waterproofing.
Defines application for EN15194 compliant E-bikes and describes shell/screen materials.
Provides physical dimensions for mounting on handlebars.
Explains the structure and meaning of the display's product coding.
Lists key specifications: power supply, current, leakage, screen type, communication, temp, waterproof.
Summarizes display functions: units, data display, assist modes, error codes, and optional features.
Details how to mount the display and remote button on the handlebar.
Describes the initial boot logo interface displayed when the display is turned on.
Explains the main interface layout and basic operational controls.
Introduces detailed function interfaces including boot, basic, other functions, and settings.
Details the display of subtotal mileage (TRIP) and average speed (AVG SPEED).
Explains ODO display, maximum speed, and clearing ODO information.
Describes how range information is provided and displayed.
Details the display of real-time clock on the bottom right corner.
Explains how error codes are displayed and their impact on the interface.
Describes how to enter and navigate setting interfaces using buttons.
Explains settings for unit, backlight level, and auto shutdown time.
Details RTC setting and wheel diameter settings.
Defines the names and functions of the display's buttons (Power, Adjust, Mode).
Explains short press and long press operations for activating functions.
Details the procedure for turning the display on and off.
Describes how to switch between different Pedal Assist System (PAS) levels.
Explains how to cycle through TRIP, ODO, and RANGE information.
Details the automatic lights-on/off function based on ambient light.
Describes manual control of the display's light under auto light function.
Details the display of real-time, average, and maximum speed.
Explains how to activate and use the walk assist mode.
Details the battery bar and percentage indication, including low-voltage mode.
Provides a table correlating SOC and battery level with descriptions.
Discusses battery communication errors and power bar behavior.
Introduces parameter setting functions and how to access them.
Details interfaces for Unit, Backlight, and Auto Shutdown Time settings.
Explains settings for wheel diameter and speed limitation.
Details how to view the display's software version.
Provides a reference table for wheel circumference values.
Explains how to clear TRIP data and its effect on other metrics.
Describes how error codes are shown on the interface and their impact.
Lists Bafang protocol error codes, descriptions, and suggest operations.
Explains the standard outlet of the display and the need for matching conversion wires.
Details the specifications and pin definitions for the Adaptor-C2H wire.
Provides notes on display security, avoiding harsh environments, and repair.
To Next Page
General
