第20 页/共 27页
5% ≤ SOC < 10%
Le
vel 0
0% ≤ SOC < 5%
Level 0 and icon blink at 1Hz
Remarks about battery indicator：
When there is a battery communication error：
1. Display will estimate the power according to the voltage and show the battery level
accordingly；
2. No battery percentage information will be shown；
3. Range information will not be displayed；
4. If the voltage is lower than the low-voltage value, the effect of the current on voltage needs to be
considered when converting to a voltage at 0 current
Before communication is established, the battery percentage is not displayed, and the power bar
is full and blinks at 2Hz. After battery info is acquired, power bar will stop blinking, and displays the
power percentage. If communication is not successful within 5s, it will stop blinking and no power
percentage will be displayed.
7 Setting function
Display provides specific parameter setting functions. The optional items of setting function will
be deleted according to different market and product requirements. The following is the complete
description of parameter setting and information indication function under the default state of display.
Please contact our sales and technical support team for confirmation in case of any discrepancies.
Within 10s after turning on display, long press M button to enter setting interface, short press 、
button to switch between setting interfaces. In any setting interfaces, short press M button to enter
parameter editing state, the blue mark indicates chosen parameter, and selected option or value will be
indicated by a white font with a grey background. Short press 、 button to edit parameters. Long
press M button to confirm parameter selection. Long press M button again to exit and return to previous
Hangzh
ou VeloFox Intelligent Technology Co,. Ltd.
Ver.
1.02
To Next Page
Loading...
Need help?
General
