VeloFox DM05 - Product Manual: Interface Sections; Boot Interface; Basic Interface and Operation

2.Function overview
① Left side independent buttons with ergonomic design
② Unit: Km/Miles
③ Display key riding data, speed, mileage, battery info, etc
④ Walk assist function
⑤ Optional: Auto light on/off function
⑥ Error code indication
⑦ *Optional：Real-Time Clock, for a current time indication
⑧ Range and battery indication（*available if BMS provides necessary info）
⑨ Motor power output
⑩ *Optional: Service reminder function
1
○
1
Parameters setting and advanced setting
3. Installation
① Display locking clip includes two handle bar sizes, size A Φ31.8mm，B Φ25.4mm. Please include
the requested locking clip size in the purchase order.
Installing DM05
display: Adjust display to a position easy to operate, using M3*10 hex set to screws
and tighten. Tightening torque: 0.8N.m
*Note: Damage caused by excessive torque is not covered by the warranty.
② Place remote button on the left side of horizontal tube, for more remote button models, please refer
to Velofox product catalog.
第8 页/共 27页
Hangzh
ou VeloFox Intelligent Technology Co,. Ltd.
Ver.
1.02