第17 页/共 27页
Short press
PAS level does not switch in cycles, that is after reaching BOOST level , short press to return
to PAS off level. It’s the same when adjusting up.
6.3 Information switch
In a power-on state, short press M button to switch in cycles among TRIP, ODO and RANGE:
TRIP/AVG -> ODO/MAX -> RANGE/AVG. In a normal riding state, if the bike speed is greater than
0, and the display is not in the basic interface, then basic interface will be automatically returned to
after 5 s no operation on the M button.
*If BMS communication is not available in the system, display can not obtain RANGE info, therefore
RANGE can not be shown.
Switching of TRIP, ODO and RANGE interfaces as follows ：
6.4 Light control function
Automatic lights-on/off function is an optional function to be selected for your display. When
equipped with auto light control function, display automatically detects the ambient light intensity and
controls the turning on/off of the lights. The icon on the top right corner of the basic interface
indicates automatic lights-on state.
Hangzh
ou VeloFox Intelligent Technology Co,. Ltd.
Ver.
1.02
To Next Page
Loading...
Need help?
General
