第18 页/共 27页
To change light state manually under auto light function, long press That is, if the light is on
under auto light function, switch off light by manually long press . If the light is off under auto light
function, switch on light by manually long press , icon on the top right conner will appear.
Long press to switch off light again. The auto light function is disabled, once the light on/off is
operated manually. Shutdown and turn on the display again, to activate the auto light function.
6.5 Speed info indication
The display provides speed info indication. Under standard condition, the basic interface
displays real-time speed, and switchable indication of average speed AVG and maximum speed
MAX. For details, refer to 6.3 Information switch.
6.6 Walk assist function
When speed is below 6 km/h, long press and hold button to enter walk assist mode. Motor
outputs power according to the set speed and controls the actual walk speed, display shows the walk
assist icon and the real-time speed while PAS level shows empty. Release button or any
other button to exit walk assist mode, the motor is turned off, and the display gets back to the basic
interface. Walk assist interface, shown as below：
Auto light state Manual light state
Hangzh
ou VeloFox Intelligent Technology Co,. Ltd.
Ver.
1.02
To Next Page
Loading...
Need help?
General
