*RTC
If chosen display model includes RTC module in its hardware, display will show real time clock
on the bottom right conner
Error code indication
When the display receives the error info returned by controller, it will show on basic
interface，and a numerical error code will be displayed in speed display area, blinking at 1Hz. While
error code is displayed, PAS level and motor output will be shown empty, and the rest of the display
functions are normal. The motor will respond to error info.
Error code interface is shown as below:
第12 页
/共 27页
Hangzh
ou VeloFox Intelligent Technology Co,. Ltd.
Ver.
1.02
To Next Page
Loading...
Need help?
General
