Velux KSX 100 Directions For Use

86 VELUX VELUX 87



Yes No

The remote control can be reset to its initial factory set-
tings if you want to delete all registered products and all
programming and start afresh.
1
Slide o the battery cover as shown.
2
Press the button on the right side of the remote control
with a pointed object for at least 5 seconds.
3
Replace the battery cover.
4
Press "Yes" to confirm that you want to reset the
remote control.
The remote control has now been reset. To reinstate the
connection between remote control and products, please
refer to the instructions in section Initial set-up.
Resetting the remote control

Velux KSX 100 Specifications

General

Product Type	Inverter
Input Voltage	230V AC
Output Voltage	24V DC
Compatibility	VELUX INTEGRA® roof windows, blinds and shutters
Frequency	50 Hz
Protection	Overload, short circuit
Function	Converts mains voltage (230V) to low voltage (24V) for operating VELUX INTEGRA® products in situations without direct mains connection.
Battery Type	Not applicable (requires external battery)