Vendo SVE DV6 Programming Manual

Instructions for programming SVE01 Board
functions
7
© SandenVendo Europe SpA
1.7 General safety warnings
 Carefully read the manual before starting or
loading the vending machine
 Protect the vending machine against weather
conditions
 Only maintenance technicians should remove
the protective covers
 Always read the programming manual before
operating the electronic board settings
 Never position the vending machine in direct
sunlight
 Never sell the products with the door open
 Refer to the routine maintenance chapter to
clean the vending machine
 Disconnect the power supply cable before
investigating or unblocking a blocked product
 Use a special protection system/Residual
current device or similar.
 Install the appliance so that the electrical plug
can be easily accessed afterwards
 If the power cable is damaged, it must be
replaced by the manufacturer or by one of its
technical support personnel or by a qualified
electrician.
 This machine is not suitable for installation in
areas where water jets are used

Vendo SVE DV6 Specifications

General

Brand	Vendo
Model	SVE DV6
Category	Vending machines
Language	English