Need help?Do you have a question about the Vents PU SENS 01 A11 and is the answer not in the manual?
General| Brand | Vents |
|---|---|
| Model | PU SENS 01 A11 |
| Category | Control Panel |
| Language | English |
Precautions for safe installation and operation of the unit, including electrical safety and handling.
Diagram showing the physical dimensions of the sensor control panel.
Step-by-step instructions for physically installing the control panel on the wall.
Description of the main screen and its navigation elements.
Instructions on how to turn the ventilation unit on and off using the control panel.
How to select and adjust the fan speed stages and humidity control mode.
Procedure for setting the desired temperature for either duct or room.
Accessing basic menu items and functions for parameter setting.
How to set the air flow value for each fan speed stage.
Selecting the heating control sensor type (duct or room).
Procedure for selecting the control panel interface language.
Configuration of heating control, fan off mode, humidity sensor, and bypass operation.
How to change the password for accessing the Engineering menu.
Setting the unit's behavior when it is in standby mode.
Adjusting the brightness for the operating and sleep modes of the display.
Setting the desired humidity level and control location (duct or room).
Accessing error information and viewing error codes and dates.
Correcting the control panel's temperature sensor readings.
Restoring the controller settings to their factory default values.
Viewing current temperature readings from various sensors.
Configuring and enabling scheduled operation based on time periods.
Setting the current date and time on the control panel.
Activating and setting up timer-based operation for the unit.
Setting filter replacement periodicity and viewing operating hours.
Displaying and referencing error messages and their descriptions.
To Next Page