15
in both vehicles traveling level. The condition of the tow vehicle’s
suspension system will affect the towing performance capability of your
equipment.
Sway controls may be needed based on size and weight of coach, plus
capability of your tow vehicle.
Hitch Height Specifications – Travel Trailer
Due to axles being either straight or drop bars,
the ball height will vary. To find the correct
height for the ball hitch, set your trailer on a flat
AND LEVELM surface in level position. Measure
from the inside of the ball socket to the ground,
approximately 18 to 22 inches as shown, for
correct spacing. You may wish to add 1 to 2
inches. to this amount to compensate for sag of
suspension of the tow vehicles when hooked to
tow vehicles.
Hook-Up (Travel Trailer)
Hooking up your travel trailer is not difficult and gets easier with practice.
The following procedure will help you until you become more
experienced.
1. To raise the tongue of trailer above the hitch ball on hitch, turn the
crank on the jack.
2. Open the coupler latch.
Trailers with tandem axles need to travel as level as possible, avoiding
different weights on each axle plus handling conditions.
CAUTION
!
Using an oversized or undersized hitch can cause damage to the frame of
your travel trailer or tow vehicle.
CAUTION
!
PDF created with pdfFactory trial version www.pdffactory.com
To Next Page
Loading...
