All hands (hour, minute and second hands) have to be moved to the 12 o’clock position
for initialising:
1. Press S1 (2 o'clock) until the hands move quickly. You can stop the fast movement
at any time by pressing S1 (2 o'clock) once.
2. Stop the fast movement before the second hand reaches the 12 o’clock position by
pressing S1 (2 o'clock).
3. Adjust the second hand slowly to move it to the 12 o’clock position by pressing S1 (2
o'clock). Do not hold the button down as the hand will speed up and may go past the
12 o'clock mark. If you accidentally go past the 12 o'clock, start this process again.
4. When all hands are aligned at the 12 o’clock position, press S3 (10 o'clock) for one
second to confirm.
After confirmation, you need to do the following:
1. Set your watch to the right country signal (UK, Germany, USA, Japan (60KHz only)).
2. Set your local time manually (go to Manual time setting for details). You don’t need
to set to the exact minute and second. But make sure when setting the hour that it is
set correctly to either AM/PM. Your watch will synchronise to the radio signal after it
receives the signal at 3am.
3. Put the watch in a location where reception is possible. The watch will automatically
initiate a reception at 3am after receiving a valid time signal, the hands move on to
the correct time.
Terms and Conditions of Sale
All goods are guaranteed against faults for 12 months from date of invoice. Faults should
be notified to Talking Watch Shop prior to return, who will issue a returns authorisation
number (RMA).
Goods can be returned as “unsuitable” within 30 days of delivery, as follows:-
1. Customer must contact Talking watch Shop Customer Services to obtain a returns
authorisation number (RMA).
2. Items must be returned in original packaging and condition.
3. Goods must be marked “Returns” and must show the authorisation number.
4. Goods lost in transit will only be refunded on proof of postage.
To Next Page
Loading...