Verbatim Store ‘n’ Go Secure Portable HDD / SSD - Chapter 3: Change Password; Password Modification Process

8
EN
Chapter 3: Change Password
1. Press and hold then connect the USB Cable with the drive and your computer until
the red LED and orange LED light up. You now can release the
button.
2.
Enter the existing password (Default password: "00000") and press to confirm.
The orange LED will turn off.
3.
Type your new password and confirm by pressing key .
4. Retype your password set in step 3 and press again until the red LED turns off.
5.
Your device is now unlocked again.