Verderflex Vantage 3000 P - Batch Function

Vantage 3000 P Version 3.4v-01/2019
16 | Page
Description Key combination Display
100 RPM 80 525ML/MN
262.5 ML 002.0 S INT
100 RPM 80 525ML/MN
100 RPM 80 525ML/MN
300.0 ML 002.0 S INT
100 RPM 80 525ML/MN
300.0 ML 002.0 S INT
100 RPM 80 525ML/MN
262.5 ML 005.0 S INT
100 RPM 80 525ML/MN
262.5 ML 005.0 M INT
100 RPM 80 525ML/MN
100 RPM 80 525ML/MN
050.0M L 0 02.0 S INT
BATCH ----- OF 000
050.0M L 0 02.0 S INT
BATCH ----- OF 015
050.0M L 0 02.0 S INT
BATCH 015 OF 015
050.0M L 0 02.0 S INT
100 RPM 80 525ML/MN
050.0M L 0 02.0 S INT
Exit Function
Note: For calibration settings, before dosing
function refer to (g8.4 System Calibra-
tion) and (g8.5 Recall Saved Calibra-
tion).
Note: Dose and Max button has to be
pressed together, at the same
time to activate Batch function.
8.10 Multi Cyclic Dosing
8.11 Batch Function