Verderflex Vantage 3000 P - S10 Head

Vantage 3000 P Version 3.4v-01/2019
9 | Page
Table 7 Installing Tube – S10 Head
7.3 S10 Head
7.3.1 Key Features
Taken from the Verderex Smart tube
pump design. The S10 includes a quick tube
change, ergonomic design for ease of use.
• Flow rates up to 1,780 ml/min (28 US GPH)
• Pressures up to 2 Bar (29 PSI)
• Multi channel options
• Typically used in:
- Chemical dosing
- Industrial uid transfer
- Heavy duty environments
7.3.2 Installing the Tube
1. Insert tube on top of the rollers
2. Fit the saddle to one set of dowels
3. Open up the lever and t the claw over
4. Push the lever down to lock the saddle
into place over the other set of dowels
3 4
1 2