Software Upgrade
Vantage 5000
1.1v-09.2019 4 | Page
1. Vantage 5000 Software Upgrade
This document helps to upgrade the software on your Vantage
5000 pump.
Upgrading to a new software may result in losing the jobs
le/settings le
A software upgrade will delete all existing information on the
pump. It will not be possible to recover previously saved job
information once the software has been upgraded.
Verder strongly recommend backing up job les/system
settings.
Checklist:
[ Check the format of the USB drive is FAT32 before loading
the software onto it.
[ Backup the jobs le/settings le.
[ Use a separate USB stick for uploading the new software.
[ Upgrade the software.
[ Restore the jobs le/settings le. (if needed)
CAUTION
To Next Page
Loading...
