FILE SYSTEMS
putEnvFile
22 M
X
800 SERIES PROGRAMMERS GUIDE
*USB DEVICE 1 Enable USB serial device
mode. You must reboot after
setting this variable.
Remove variable and reboot
to disable.
*USBHOST 1 IF *USBHOST exists, USB
host (hotplug) will be
disabled.
*FTPHOST xxx.xxx.xxx.xxx or ASCII
server DNS name
Max length = 96
characters
Either IP address or DNS
name of FTP server.
*FTPPORT Default = 21 Port number for FTP
connection.
*FTPFILE Default=app.tgz
Max length = 96
characters
Remote file name (and path)
of file to be retrieved from
the FTP server.
*FTPPWD Default = Terminal S/N
Max length = 32
characters
FTP password
*FTPUSER Default = anonymous
Max length = 32
characters
FTP User ID
*SYSLOG_MARK Default = 30
Min = 10
Max = 1440
Off = 0
Specifies when a “MARK”
timestamp marker is placed
in the syslog messages file.
*SYSLOG_RHOST Default = null Specify a remote IP address
to send syslog messages
via a UDP network
connection.
*SYSLOG_RPORT Default = 5140 Specify what port to use
when sending syslog
messages to remote UDP
network connection.
*SYSLOG_RLOG Default = TRUE Log syslog messages
remotely.
*SYSLOG_USRLOCAL Default = FALSE Log user log messages
locally (this option does not
affect OS or root generated
messages).
Table 5
Variable Name Values Definition
To Next Page
Loading...
