VeriFone MX800 Series - Rfcrreset()

CONTACTLESS RF CARD READER MODULE
RFCRReset()
236 M
X
800 SERIES PROGRAMMERS GUIDE
RFCRReset()
Configures the RESET line of the RFCR module.
Prototype
int RFCRReset(int onOffPulse);
Parameters
Return Values
onOffPulse 0 = OFF
1 = ON
2 = PULSE (OFF then ON)
0 Success, for OFF
> 0 Success, for ON or PULSE. Return value is the RFCR handle
< 0 Error
-EBADF if not initialized