VeriFone MX800 Series - Setsecurepindisplayparameters()

DEVICE DRIVERS
SetSecurePINDisplayParameters()
M
X
800 SERIES PROGRAMMERS GUIDE 65
SetSecurePINDisplayParameters()
setSecurePINDisplayParameters() sets the hot spot table and registers
the callback function for the upcoming PIN session. This function must be called
each time prior to requesting a PIN session either through an IPP packet (Z60,
Z63 or Z69) or through a VeriShield Security Script API
(iPS_RequestPINEntry()). See SetSecurePINDisplayParameters().
Prototype
void setSecurePINDisplayParameters(struct touch_hs_s *hotspot_table, void
*callback);