DEVICE DRIVERS
VeriShield Security Scripts APIs
58 M
X
800 SERIES PROGRAMMERS GUIDE
Up to eight VeriShield Security Scripts can coexist in the unit at a same time. Each
script defines its independent key space and defines whether or not those keys
can be loaded using the generic key loading functions
(iPS_LoadMasterClearKey() and iPS_LoadMasterEncKey()).
The VSS Key Loading Key (VSS_KLK) is a double-length key. It is loaded in the
clear, but can also be loaded encrypted under its previous value. Since there is no
default value in the firmware for the VSS_KLK, the first time it must be loaded in
the clear. In that case, other keys in the unit will be erased, so it must be loaded
before all other keys. This must be done in a secure environment before
deployment.
The security script’s master keys can be loaded in the clear or encrypted under
VSS_KLK. Loading additional keys without erasing the keys previously loaded
must be done in encrypted form and therefore requires the knowledge of
VSS_KLK.
Each script defines its own set of keys and also defines if the keys may be loaded
with those generic key-loading functions. Some scripts may disallow their use and
implement custom macro commands for key loading.
To Next Page
Loading...
