14
© VeriFone, Inc. All rights reserved.
Installation Guide P400/P400 Plus
The following table describes the two preferred mounting methods and the
recommended measures to protect from PIN capture in four observation
corridors:
Table 1 Mounting Methods and Protection Measures
Verifone also recommends instructions to the cardholder regarding safe
PIN-entry. This can be done with a combination of:
• Signage on the PED.
• Prompts on the display, possibly with a click-through screen.
• Literature at the point of sale.
• A logo for safe PIN-entry process.
Ensuring User
Privacy
Use the following guidelines to protect the user’s privacy when he enters his
personal identification number (PIN):
• The area of visibility should be no larger than a cone taken from the number 5
key at an angle of 45° and covering an area of 270° directly in front of the user.
• You can secure PIN entry by installing an optional Privacy Shield.
Unpacking
Shipping
Carton
Carefully inspect the shipping carton and its contents for possible
tampering or damage.
1 Remove the P400 unit from the shipping carton. The standard package
contains the PIN pad only and does not include any other cables or
accessories. Refer to
Accessories and Cables for more information about
P400-related accessories.
Method Cashier Customer in Queue
Customers
Elsewhere
On-site
Cameras
Countertop
without
stand
Use signage
behind the
PED
Install so that
customer is between
PED and next in the
queue
No action
needed
Do not
install within
view of
cameras
Countertop
with stand
No action
needed
Install so that
customer is between
PED and next in the
queue
No action
needed
Do not
install within
view of
cameras
To Next Page
Loading...
Need help?
General
