P200/P400 REFERENCE GUIDE 5
PREFACE
This guide is the primary source of information for setting up and installing the
P200 or P400 PINpad.
Audience
This guide is useful for anyone installing and configuring the PINpad.
Organization
This guide is organized as follows:
Chapter 1, Overview. Provides an overview of the PINpad.
Chapter 2, Using the PINpad Keys. Explains how to set up and install the PINpad.
It tells you how to select a location, establish power connections, and how to
configure optional peripheral devices.
Chapter 3, System Mode. Describes password-controlled,
System mode operations, as well as how to use it to perform a variety of test and
configuration procedures.
Chapter 4, File Authentication. Describes the file authentication module of the
VeriShield security architecture and describes how to use the file signing utility,
VeriShield File Signing Tool to generate signature files.
Chapter 5, Performing Downloads. Documents procedures for downloading
applications and files to the device.
Appendix A, System Messages. Provides description about error and information
messages, which are grouped into two categories.
Appendix B, Port Pinouts. Provides list of pinouts for the PINpad, dongles, and
cable connectors.
Appendix C, ASCII Table. Provides an ASCII table.
Related
Documentation
Refer to the following set of documents to learn more about the PINpad:
• P400 Certifications and Regulations Sheet, VPN DOC435-001-EN
• P400 Quick Installation Guide, VPN DOC435-002-EN
• P400/P400 Plus Installation Guide, VPN DOC435-003-EN
• P200/P400 Mounting Adapter Quick Installation Guide, VPN DOC435-005-EN
• P200 Certifications and Regulations Sheet, VPN DOC430-001-EN
• P200 Quick Installation Guide, VPN DOC430-002-EN
• P200/P200 Plus Installation Guide, VPN DOC430-003-EN
• Engage Low-Profile Privacy Shield Quick Installation Guide,
VPN DOC000-021-EN
To Next Page
Loading...
Need help?
General
