3. Training Mode
Before using the terminal for live transactions we advise that you take 5 minutes to familiarise
yourself by processing some transactions in Training Mode. Please follow the instructions
below to switch the terminal in/out of Training Mode;
From the idle screen (opposite) press the left hand purple
Programmable Function key. There is a down arrow on the screen
above.
Select the Supervisor Mode by pressing F0
Now key in the password 999999 and press Enter
Please select F1 for Training.
Please press F0 and the terminal will enter training mode. When you
need to exit Training Mode repeat this process and select F1. Now return
the terminal to the Sales screen by pressing the Cancel button.
Now that Training Mode is switched on it is possible to conduct Sale and Refund transactions.
The main screen will display Demo down the left hand side and all receipts will have
TRAINING printed on them. Please complete the transaction described over page, you can use
any card for practicing transactions in this mode.
6 VeriFone Apacs 40 User Guide
2/2/6 Sale
Refund
Reports
Services
Reversal
Duplicate
Supervisor
Configuration
Password:
Training On
Off
Supervisor
Training
About
Lock Kbd
Date/Time
Reset Mac
To Next Page
Loading...
Need help?
General
