V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
R
E
V
I
S
I
O
N
B
.
1
VX 685/VX 690 INSTALLATION GUIDE 13
CHAPTER 2
Setup
This chapter describes the setup procedure for:
• Selecting a Location.
• Unpacking the Shipping Carton.
• Examining Terminal Features.
• Examining the Connection Port.
• Installing/Replacing Paper Roll.
• Installing/Replacing SIM Card.
• Installing/Replacing MSAM Cards.
• Installing/Replacing the Micro SD Card.
• Connecting Optional Devices.
• Battery Features.
• Connecting the Terminal to Power Source.
• Base Stations.
• Powering Up the Base.
• 3G, GPRS, and GPS Support.
• VX 690 Wi-Fi/BT Support.
• Using the Smart Card Reader.
• Using the Magnetic Card Reader.
• Performing a Contactless Smart Card Transaction.
Selecting a
Location
Use the following guidelines to select a location for the terminal.
Ease of Use
• Select a location convenient for both merchant and cardholder.
• Select a flat support surface, such as a countertop or table.
• Select a location near a power outlet, ECR, or computer connected to the
terminal. For safety, do not string cables or cords across a walkway.
Environmental
Factors
• Do not use the unit where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
To Next Page
Loading...