Sivu
16(36)
28.9.2016
3. DOWNLOADS
3.1 Application downloads
NOTE! The terminal should be kept still and connected to the power cord
during the entire download. Do not download software to the terminal e.g. in a
moving vehicle. This might disrupt the download.
Send the batch from the terminal before downloads. To send the batch, select the Reports
icon from the screen, press Enter and choose SEND BATCH.
Select the Settings icon from the screen and press Enter.
Choose APP. DOWNLOAD
Select APP + PARAMS or ONLY APPLICATION
The terminal downloads the application. A white bar appears on the screen, which gradually turns black
as the download progresses.
Parameters must be downloaded to the terminal after the application download has finished.
See instructions below.
3.2 Downloading parameters
Select the Settings icon from the screen and press Enter.
Choose DOWNLOAD
Choose FROM LOADPOINT
Choose PHONE
The terminal downloads the parameters. A white bar appears on the screen, which gradually turns black
as the download progresses. The terminal prints on the paper “SUCCESSFUL PARAMETERS
DOWNLOAD”.
After downloading the parameters, the terminal must send batch. Select Reports from the
screen, press Enter and choose SEND BATCH.
To Next Page
Loading...
Need help?
General
