Sivu
8(36)
28.9.2016
1.6 SIM-card
1 Turn off the terminal.
2 Place the terminal upside down on a soft, clean surface to protect the lens from scratches.
3. Remove the back cover of the unit.
4 Lift the battery pack to expose the SIM slots.
5. Carefully slide SIM card into the slot until fully inserted, as shown on the image.
6. Put in place the battery and back cover.
Terminals which use 3G-connection have a SIM-card. Before inserting the SIM-card inside the
terminal, disable the PIN-code query. The SIM-card operator’s APN information is inserted to the
GPRS APN menu in the terminal. The APN information is set to INTERNET by default, change this if
needed.
NOTE! You need daily password to change the APN setting. Please contact our
Help Desk or get it from our Reporting service.
1.7 Touchscreen
The terminal has a touchscreen, which allows selecting menus directly from the screen. Enter- and
cancel-functions can be selected directly from the screen or by pressing the particular key.
To Next Page
Loading...
Need help?
General
