VeriFone Vx680 User Manual

8 Live epos integrated User Guide
2.3 Powering up
Connecng base staon to power
1. Insert the power cable into the power port
on the terminal base.
2. Plug the AC power cord into a wall outlet or
a power surge.
3. Place terminal on charger to begin charging
the terminal.
Manual Start-up
Hold the green (Enter) key down for about 10 seconds unl terminal displays the start- up
screen.
Manual Shutdown
Hold the red (Cancel) key down for about 10 seconds unl the terminal displays the
shutdown vericaon screen. Keep holding the red key unl the terminal shuts down. (Must
be unplugged from power supply before aempng manual shut down)
2.4 Loading paper
1. On top of your terminal, li and open the black paper compartment latch.
2. Posion the paper roll with the end of the roll protruding from underneath the roll
towards the terminal screen.
3. Pull paper out slightly and close the cover.
2.5 Geng started
Your Live epos integrated terminal arrives as a complete unit. Included in your delivery is:
• quick reference guide
• terminal
• terminal base
• paper rolls
• power supply
• cables (RS232 serial, USB and dial cables).
For any PC-EFTPOS soware queries, please contact the PC-EFTPOS Help Desk on
02 9998 9800.

VeriFone Vx680 Specifications

General

Processor	400 MHz ARM11
Memory	192 MB (128 MB Flash, 64 MB SDRAM)
Operating System	Verix V
Display	3.5" QVGA (240 x 320) color LCD with backlight
Connectivity	Wi-Fi, Bluetooth, 3G
Card Readers	Magstripe, Chip, Contactless
Battery	Li-ion, 7.2V, 1800mAh
Printer	Integrated thermal printer