6666
Machine Setup
To raise or drop the feed dogs
The drop feed lever can be seen on the base
at the front side of the sewing machine.
Sliding the drop feed lever to lower or raise
the feed dogs. When lever is in raised
position, the feed dog will arise automatically
when you are sewing.
Adjusting the presser foot pressure
The presser foot pressure dial is on the top
left of the face plate.
The presser foot pressure of the machine
has been pre-set and requires no particular
adjustment for general sewing.
Basic presser foot pressure setting: "0".
For sewing with very thin fabric, reduce the
pressure by turning the knob clockwise (-1, -2,
-3) and for heavy fabric, increase the pressure
by turning it counter-clockwise (+1, +2).
①
Drop feed lever
②
Lowered position
③
Raised position
Note
When you nish the work, (e.g. button
sewing, free motion darning, embroidery
and monogramming), please move the drop
feed lever to raised position for general
sewing purpose.
2
1
To Next Page
Loading...
