VERITAS Florence - Value Setting and Speed Control; Selecting Stitch

71
Instruction
EN
Selecting stitch
Select the desired stitch from those shown on
the stitch pattern plate.
1. Press the group switch button to change
to the A group patterns or B group
patterns mode.
2. When the group pattern light is on, the +/-
buttons can be used to select the pattern
number needed; press the "+" button
to select the next pattern number and
press the "–" button to select the previous
pattern number.
When the +/- button is pressed and held
down, the numbers will change continuously
for quick selection.
8. Value setting buttons
The +/- button can modify the values for
sewing. (stitch number/ stitch length/ stitch
width/ thread tension)
9. Speed adjustment slider
The speed adjustment slider can control the
sewing speed. To increase the speed, slide
the lever to the right. To decrease the sewing
speed, slide the lever to the left.
22
1