VERITAS NetBackup Series User Manual

Table 1-11
Appliance Fibre Transport targets (continued)
ToFromFunction
NetBackup SAN Client.NetBackup 5020 appliance.
The 5020 deduplication appliance is the storage
host. It sends the restore traffic through the 52xx
or 53xx appliance, which is the restore server.
Restores
NetBackup 5020 deduplication appliance.NetBackup 52xx or 53xx appliance.Duplication
NetBackup 52xx or 53xx appliance.NetBackup 52xx or 53xx appliance.Duplication
An external tape library uses the standard initiator mode driver over Fibre Channel
(FC), not NetBackup FT. Therefore, if you duplicate backup images from a tape
library to a NetBackup 5020 deduplication appliance, traffic occurs as follows:
■ FC between the tape library and the 52xx or 53xx appliance.
■ FT between the 52xx or 53xx appliance and the 50xx deduplication appliance.
About appliance duplication paths
Figure 1-5 shows the duplication paths from a 52xx or 53xx appliance to a
NetBackup deduplication appliance.
Figure 1-5
Appliance duplication paths from a 52xx or 53xx to a 5020 or
5030 appliance
52xx or 53xx appliance 5020 or 5030 appliance
Fibre Transport traffic
Tape library
Fibre Channel
SAN
SAN
External
tape storage
zone
Fibre Transport
storage zone
Figure 1-6 shows the duplication paths from a 52xx or 53xx appliance to another
NetBackup 52xx or 53xx appliance.
28Introducing Fibre Channel support on NetBackup Appliance
About Fibre Transport paths for NetBackup appliances

VERITAS NetBackup Series Specifications

General

Replication	Yes
Deduplication	Yes
Encryption	Yes
Backup Types	Full, Incremental, Differential
Storage Support	Disk, Tape, Cloud
Compression	Yes
High Availability	Yes
Disaster Recovery	Yes
Operating System	Linux
Vendor	VERITAS
Product	NetBackup
Protocols	NDMP, OST
Cloud Integration	AWS, Azure, Google Cloud
Scalability	Yes
Management Interface	Web-based, CLI
API Support	Yes
Use Case	Enterprise Backup and Recovery