VERITAS NetBackup Series User Manual

Table 2-5
Summary of supported NetBackup 5220 and 5230 FC options
Supported options and required port configurationFC HBA slot
Port 1
■ SAN Client - target (5220 only)
■ Tape out - initiator
■ NetBackup for VMware - initiator
Port 2
■ SAN Client - target (5220 only)
Note: If Port 1 is in the initiator mode, Port 2 cannot be set to the
target mode. Port 2 can only be configured for the target mode when
the 4 target port Fibre Channel connection option is selected.
■ Optimized duplication - initiator
■ Auto Image Replication - initiator
■ Tape out - initiator
■ NetBackup for VMware - initiator
Use only one option on each port.
This slot is populated with an FC HBA card on the following HBA
configurations:
■ 5220 HBA configurations D and E
■ 5230 HBA configurations D and E
On 5220 HBA configurations D and E, this slot is reserved for Fibre
Transport media server (FTMS). If you enable SAN Client FTMS with
those two configurations, Port 1 is changed to target mode for SAN
Client by default.
Slot 2 (5220 and
5230)
39About the HBA port mode configuration
Supported Fibre Channel port configurations for the NetBackup 5220 and 5230 appliances

VERITAS NetBackup Series Specifications

General

Replication	Yes
Deduplication	Yes
Encryption	Yes
Backup Types	Full, Incremental, Differential
Storage Support	Disk, Tape, Cloud
Compression	Yes
High Availability	Yes
Disaster Recovery	Yes
Operating System	Linux
Vendor	VERITAS
Product	NetBackup
Protocols	NDMP, OST
Cloud Integration	AWS, Azure, Google Cloud
Scalability	Yes
Management Interface	Web-based, CLI
API Support	Yes
Use Case	Enterprise Backup and Recovery