VERITAS NetBackup Series User Manual

Table 2-7
Supported NetBackup 53xx PCIe card slot configurations and
FC options (continued)
Supported FC optionsCard slot and type
Port 1
■ SAN Client - target
■ Optimized duplication - initiator
■ Auto Image Replication - initiator
■ Tape out - initiator
■ NetBackup for VMware - initiator
Port 2
■ SAN Client - target
Note: If Port 1 is in the initiator mode, Port 2 cannot be
set to the target mode. Port 2 can only be configured for
the target mode when the 4 target port Fibre Channel
connection option is selected.
■ Optimized duplication - initiator
■ Auto Image Replication - initiator
■ Tape out - initiator
■ NetBackup for VMware - initiator
Use only one option on each port.
This slot is populated with an FC card on 53xx HBA
configurations C, D and E.
This slot is reserved for Fibre Transport media server (FTMS).
If you enable SAN Client FTMS with those three
configurations, Port 1 is changed to target mode for SAN
Client by default.
Slot 5
10Gb NIC or 8Gb FC HBA
49About the HBA port mode configuration
Supported Fibre Channel port configurations for the NetBackup 53xx appliances

VERITAS NetBackup Series Specifications

General

Replication	Yes
Deduplication	Yes
Encryption	Yes
Backup Types	Full, Incremental, Differential
Storage Support	Disk, Tape, Cloud
Compression	Yes
High Availability	Yes
Disaster Recovery	Yes
Operating System	Linux
Vendor	VERITAS
Product	NetBackup
Protocols	NDMP, OST
Cloud Integration	AWS, Azure, Google Cloud
Scalability	Yes
Management Interface	Web-based, CLI
API Support	Yes
Use Case	Enterprise Backup and Recovery