18
Airspeed Mobile Hotspot
Update Mobile Hotspot Software
You can check for new software updates through the Online WebUI Manager.
1. Select System＞Current Software.
2. Click Check for Updates.
3. Wait a moment as the device searches for updates.
4. If there is an update, you will be prompted to activate the update on the Online
WebUI Manager.
Note: The battery life must be over 30% to proceed with the software update.
Perform a Factory Reset
You can restore your Airspeed Mobile Hotspot to default factory settings. It will reset all
of the custom settings saved.
1. Select System＞Factory Reset.
2. Click Reset.
3. Click Confirm.
4. Wait a moment as the device is restored to the default settings.
5. You will need to re-connect to the device with its default Wi-Fi login credentials
shown on the display.
You can also manually perform a factory reset by
inserting a paperclip (or a long, narrow object) into
the reset pinhole located on the bottom of device
and holding for 6 seconds, It will reset all of the
custom settings saved.
Note: The default password can be found at
More Setting>Admin Website on your Airspeed
Mobile Hotspot.
Factory Reset Pinhole
To Next Page
Loading...
Need help?
General
