Device Setup
DHCP & Link Local
Automatic Conguration
By default, the DHCP & Link Local Automatic Conguration
is selected and you will obtain an IP address for the MoCA
Ethernet Adapter from your home router. It is recommended
to select this mode.
Static IP Address Select the Static IP Address if you want to manually
congure the IP address of the MoCA Ethernet Adapter.
IP Address This is only needed if the Static IP Address is selected above.
Enter the IP address. Please make sure that the IP address
of each MoCA Ethernet adapter is unique and is in the same
network subnet as the home network.
Netmask This is only needed if the Static IP Address is selected above.
Enter the Netmask.
Gateway This is only needed if the Static IP Address is selected above.
Enter the IP address of your home router.
12
To Next Page
Loading...
