11
/ INTRODUCTION
verizon.com/fios | ©2020 Verizon. All Rights Reserved
• Reset ButtonReset Button - allows you to reset your Fios Extender to
the factory default settings. To perform a soft reboot, press
and hold the button for at least three seconds. To reset your
Fios Extender to the factory default settings, press and hold the
button for at least ten seconds.
• PowerPower - connects your Fios Extender to an electrical wall outlet
using the supplied power adapter.
Warning: The included power adapter is for home use only,
supporting voltages from 105-125 voltage in AC. Do not use in
environments with greater than 125 voltage in AC.
1.3c/ MOUNTING THE FIOS EXTENDER TO A WALL
For optimum performance, the Fios Extender is designed to stand
in a vertical upright position. Verizon does not recommend wall
mounting the Fios Extender. However, if you wish to mount your
Fios Extender, you can purchase a wall mount bracket from the
Verizon Fios Accessories Store at verizon.com/home/accessories/
networking-wifi
To mount your Fios Extender to a wall:
1. You may use the wall-mount template sheet for positioning
the Fios Extender.
To Next Page
Loading...
