Verizon Fios Extender E3200 - Page 25

25
 / CONNECTING YOUR
FIOS EXTENDER
verizon.com/fios | ©2020 Verizon. All Rights Reserved
2. Enable the protected setup by moving the selector to OnOn.
3. Use one of the following methods:
• If your Wi-Fi client device has a WPS button, press the
unified button on your Fios Extender for more than two
seconds, then click the WPS button on your
Wi-Fi device (client) to start the WPS registration process.
• If your client device has a WPS PIN, locate the PIN printed
on the client’s label or in the client documentation. Enter
the PIN number in the Client WPS PINClient WPS PIN field. The Client Client
WPS PINWPS PIN field is located in the section 2 - PIN enrollment2 - PIN enrollment
on the user interface.
• Click RegisterRegister.
• Alternatively, you can enter the Fios Extender’s PIN shown
on this screen into the WPS user interface of your device,
if this PIN mode is supported by your Wi-Fi device.