Verizon LTE Network Extender User Manual

Verizon 4G LTE Network Extender User Guide v0.8 6
Copyright © 2020, All Rights Reserved.
Your LTE Network Extender can be setup by following the procedures explained in this section. Before installing the LTE
Network Extender, remember to confirm that your package contains all components, and review the Product Safety and
Warranty document included in the package.
2.1 Extender
1. It’s recommended to place the LTE Network Extender near a window or otherwise elevated location such as on a
bookshelf or cabinet, for best results.
2. Using the provided Ethernet cable, connect an available LAN port on your router to the LAN port on your LTE
Network Extender.
3. Connect the included power adapter to the LTE Network Extender’s DC 12V power port and plug the power
adapter into an available power outlet.
4. The Power LED should blink white when the LTE Network Extender is plugged in, to indicate the initialization and
startup process. If the Power LED displays solid red, this indicates a hardware issue/problem.

Verizon LTE Network Extender Specifications

General

Coverage Area	Up to 7, 500 square feet
Connectivity	Ethernet
Network	Verizon 4G LTE
Frequency Bands	Band 13 (700 MHz)
Supported Devices	Verizon Wireless LTE devices
Backhaul Connection	Broadband internet connection (minimum 10 Mbps download / 3 Mbps upload)