Vernacare Vortex - Fault 8: Hopper Does Not Empty; Fault 9: Large Particle Size in Product Stock

36
Hopper does
not empty
Drain is blocked.
Display screen indicates
`BLOCKED DRAIN`
Outlet diaphragm
valve not operating.
Check drain for blockage – Clear.
Check service drain for blockage –
Clear.
Check diaphragm for blockage – Clear.
Product stock
has large
particle size –
over 10 mm
Lack of water in the
hopper
For lack of water see fault 3
Damaged cutter
blade.
Inspect cutter blade for damage –
Replace.
Motor running slow.
Check invertor output speed-
reprogram/replace.
Check hopper has not been
overloaded.
Check outlet valve operation.
Check diaphragm spring attachment.
Check diaphragm not spilt or
damaged.
Fault 8
Fault 9