Need help?Do you have a question about the Versa Technology VX-IGP-1204F and is the answer not in the manual?
Defines the user guide's purpose and content related to CLI commands for the VX-IGP-1204F.
Identifies the intended readers of the guide as operating personnel or craft persons.
Outlines the basic operational knowledge and security constraints readers should possess.
Specifies the requirements for accessing the hardware interface via a terminal.
Lists other relevant documents that may be useful for the user.
Explains the switch's logon security, inactivity monitoring, and initial user credentials.
Details the interface connection methods (Console, Telnet, SSH) and their parameters.
Outlines the steps for connecting to the switch via Telnet and logging in.
Describes the different CLI execution modes, their purposes, and corresponding prompts.
Explains how to use the question mark symbol for context-sensitive help within the CLI.
Lists common terminal keys and their specific functions within the CLI.
Explains the conventions used for command syntax, including optional parameters and choices.
Lists commands executable in any mode, primarily for initialization and basic CLI control.
Details commands, mostly 'show' commands, executable in Enable mode and other modes except Initialize.
Covers commands used for configuring various aspects of the switch, executed in Configure mode.
Lists commands specifically for configuring and managing VLANs.
Details commands for configuring IP addresses and related settings on VLAN interfaces.
General| Layer | Layer 2 |
|---|---|
| Switching Capacity | 24 Gbps |
| MAC Address Table | 8K |
| Humidity | 5% to 95% (non-condensing) |
| Protection | IP30 |
| Enclosure | Metal |
| Mounting | DIN-Rail, Wall Mount |
| Device Type | Industrial Gigabit Ethernet Switch |
| Ports | 4 x 100/1000BASE-X SFP |
| Power over Ethernet (PoE) | No |
| Operating Temperature | -40°C to 75°C |
| Storage Temperature | -40°C to 85°C |
| Jumbo Frame | 9K bytes |
To Next Page
