Valid words are 'Aggregation' 'DHCP' 'Debug'
'Dhcp_Client' 'Diagnostics' 'EEE' 'Green_Ethernet' 'IP2'
'IPMC_Snooping' 'LACP' 'LLDP' 'Loop_Protect'
'MAC_Table' 'MVR' 'Maintenance' 'Mirroring' 'NTP' 'Ports'
'Private_VLANs' 'QoS' 'RPC' 'Security' 'Spanning_Tree'
'System' 'Timer' 'VCL' 'VLANs' 'Voice_VLAN' 'XXRP'
'sFlow'
Web privilege group level
Configuration Read-only level
Configuration Read-write level
Status/Statistics Read-only level
Status/Statistics Read-write level
3.3.87 flow-control {enable|disble}
Enable/Disable flow-control.
flow-control {enable|disble}
Configure gigabit Ethernet speed and Copper/SFP for gigabit port 7~8.
(port1~6 Only support copper, no SFP)
(port 9, 10 only support auto)
speed
{auto|full-l000mbps|full-100mbps|full-10mbps|half-100mbps|half-10m
bps}
Set 1000Mbps full duplexing.
Set 100Mbps full duplexing.
Set 10Mbps full duplexing.
Set 100Mbps half duplexing.
Set 10Mbps half duplexing.
3.3.89 port {enable/disable}
Set interface gigabit port enable or disable.